Planet ISW-511S15
€ 74,95 (exkl. MwSt.)
€ 90,69 (inkl. MwSt.)
– 4-port 10/100Base-TX
– 1-port 100Base-FX Single mode – 15km
– Industrial fast ethernet switch
– Temp. range -10 ~ +60 degrees
– IP30 metal case
– DIN rail and wall-mount
Verfügbar bei Nachbestellung
New slim type with more practicability and convenience
PLANET has released the ISW-511 / ISW-511S15, an advanced industrial hardened Ethernet Switch with new slim type, IP-30 metal case. They each are equipped with 4 10/100Base-TX auto-negotiation ports. The ISW-511 has one 100Base-FX multi-mode SC interface for transmission distance up to 2km, and the ISW-511S15 has one 100Base-FX single-mode SC interface for transmission distance up to 15km. Both of them operate reliably in Heavy Industrial demanding environments. The compact, IP-30 standard metal case allows either DIN rail or wall mounting for efficient use of cabinet space.
Stable Operating Performance under Difficult Environments
The ISW-511 / ISW-511S15 provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -10 to 60 degrees C, the ISW-511 / ISW-511S15 can be placed in almost any difficult environment. The ISW-511 / ISW-511S15 also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs.
Robust Switch performance
The ISW-511 / ISW-511S15 each provides four 10/100Base-TX Ethernet ports and one 100Base-FX optic-fiber SC interface, and boasts a high performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps. With 2K MAC address table, they offer wire-speed packets transfer performance without risk of packet loss. The Flow Control function allows the ISW-511 / ISW-511S15 for fast and reliable data transfer.
All of the RJ-45 copper interfaces in the ISW-511 / ISW-511S15 support 10/100Mbps auto negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight or crossover cables.
Schreibe die erste Bewertung für „Planet ISW-511S15“
Industrial Area Switch for Data Collect and Forward
The ISW-511/ ISW-511S15 is equipped with four 10/100Mbps ports that offers auto MDI / MDIX feature, one 100Base-FX optic-fiber SC interface, 1Gps non-blocking switch fabric, and the 2K MAC address table so that they can perform wire-speed packets transfer without risk of packet loss. The ISW-511 / ISW-511S15 in the slim type IP 30 metal shape is ideal for most Heavy Industrial demanding environments.
| Hardware Specifications | |
| Copper | Ports 4 x 10/100Base-TX, auto negotiation, auto-MDI/MDI-X Cable 10Base-T : 2-pair UTP Cat. 3, 4, 5cable (100meters, max.) 100Base-TX : 2-pair UTP Cat. 5cable (100meters, max.) |
| Optical | Port 1 x 100Base-FX Cable ISW-511: 50/125μm fiber ISW-511S15: 9/125μm fiber Mode ISW-511: Multi-mode ISW-511S15: Single-mode Distance ISW-511: 2km ISW-511S15: 15km Frequency ISW-511: 1310nm ISW-511S15: 1310nm Launch Power ISW-511: Max. -14dBm, Min. -19dBm ISW-511S15: Max. -7dBm, Min. -20dBm Receive Sensitivity ISW-511: -34.5dBm ISW-511S15: -28dBm Max. Input Power ISW-511: -14dBm ISW-511S15: -8dBm |
| Dimensions (W x D x H) | 135 x 97 x 32 mm |
| Weight | 436g |
| Power Requirements | 12~48 VDC, Redundant power with polarity reverse protection function |
| Power Consumption / Dissipation | 9.1 watts / 31BTU |
| Installation | DIN rail kit and wall mount ear |
| Alarm | Provides one relay output for power failure Alarm relay current carry ability: 1A @ DC 24V |
| Switch Specification | |
| Switch Processing Scheme | Store-and-Forward |
| Address Table | 2K entries |
| Buffer | 1Mbit |
| Flow Control | Back pressure for half duplex, IEEE 802.3x Pause Frame for full duplex |
| Switch Fabric | 1Gbps |
| Throughput | 0.74Mpps @ 64Bytes |
| Standards Conformance | |
| Standards Compliance | IEEE 802.3 Ethernet, 10Base-T IEEE 802.3u Fast Ethernet, 100Base-TX, 100Base-FX IEEE 802.3x Full-duplex flow control |
| Temperature | Operating: -10~60 degrees C Storage: -40~85 degrees C |
| Humidity | Operating: 5~90%, Storage: 5~90% (non-condensing) |
| Regulation Compliance | FCC Part 15 Class A, CE |
| Safety | UL, cUL |
| Stability Testing | IEC60068-2-32(Free fall), IEC60068-2-27(Shock), IEC60068-2-6(Vibration) |
Ähnliche Produkte
Batteriesätze
• Batterijvervanging voor UPS
• 12Volt
• 2 blok in de set
€ 39,00 (exkl. MwSt.)
€ 47,19 (inkl. MwSt.)
Batteriesätze
– APC batterij vervanging set
– RBC14
– 4 blokken in één set
– A-kwaliteit 100% nieuwe batterijen
€ 536,00 (exkl. MwSt.)
€ 648,56 (inkl. MwSt.)
Smart PDUs
8-poorts 19″-rack unit
– True RMS stroom meter
– Totaal vermogen monitoren
– Waarschuwingsniveau’s voor alarmen
– Hoorbaar alarm
€ 94,88 (exkl. MwSt.)
€ 114,80 (inkl. MwSt.)
Smart PDUs
– 8-poorts 19″-rack unit
– True RMS stroom meter
– Uitgangen individueel/groep schakelbaar
– geagendeerd, autoping
– Voeding aan/uit volgorde definieerbaar
– Meldingen via E-mail, trap en hoorbaar signaal
€ 398,95 (exkl. MwSt.)
€ 482,73 (inkl. MwSt.)
Batteriesätze
• Batterijvervangingsset voor UPS
• 12 Volt
• 1 batterijblok in de set
€ 18,00 (ex. VAT)
€ 21,78 (incl. VAT)
Batteriesätze
– S4P-RBC20 batterijvervanging voor UPS
– Set bestaat uit twee blokken
– Hoge kwaliteit batterijen
€ 29,00 (ex. VAT)
€ 35,09 (incl. VAT)
Batteriesätze
– S4P-RBC26 vervangingsset voor UPS
– set bestaat uit acht blokken
– Hoge kwaliteit batterijen
€ 136,00 (ex. VAT)
€ 164,56 (incl. VAT)
Batteriesätze
– S4P-RBC22 vervangingsset voor UPS
– Set bestaat uit twee blokken
– Hoge kwaliteit batterijen
€ 35,00 (ex. VAT)
€ 42,35 (incl. VAT)
Bewertungen
Es gibt noch keine Bewertungen.