Planet ICS-100
€ 83,43 € 68,95

- RS-232/RS-422/RS-485 over fast ethernet 
- 1 port serial / 1 port RJ-45
- Distance 100 meters max
- Built-in IP-base Web interface

Product: Planet ICS-100 are being added to cart ...
x
x
Product: Planet ICS-100 was added to cart.

Cost-effective Solution for RS-232 / RS-422 / RS-485 to Ethernet Application
PLANET ICS-100 Media Converter / Device Server provides to convert Serial RS-232 / RS-422 / RS-485 communication interface over Fast Ethernet networking. Ethernet signal allows two types of segments to connect easily, efficiently and inexpensively. This converter can be used as a stand-alone unit or as a slide-in module to PLANET Media Converter Chassis (MC-700 / MC-1500/ MC-1500R / MC-1500R48). It is time, saving expense for users and SIs, and there is no need to replace the existing serial equipment and software system.

Remote Manageable 
The ICS-100 makes connected serial equipment become the IP-based type. That also makes them able to connect to a TCP / IP networking immediately. Each Web-Smart converter is able to manage Web interface. The powerful Web-Smart Media Converter supports application mode and serial operation mode, connecting alarm, IP address, etc. It helps reduce the amount of valuable time that a network administrator spends detecting and locating network problems; otherwise, it requires visual inspection of cabling and equipment. Multiple connection options for large networking environment are available as well.

Meer informatie
Prijs € 68,95
Gewicht 0.2000
Aantal Poorten 1-poort
Netwerksnelheid 10/100 Mbps
PoE systeem Nee

Access Control System – Traditional Installation
Most of the enterprises and governments use access control plate and Mifare or RFID to authorize entrance identity. With the traditional deployment, access control machine uses RS-232 or RS-485 serial interface and cables connecting to login server. With connection to ICS-10x serial over Fast Ethernet Converter, the access control machine is able to extend over longer distances via Ethernet. Or the ICS-10x can be linked to an XDSL router to get the internet access capability; the access control can be set and monitored over the Internet.

Process Control
To monitor, configure and manage the Robot conveyer including other manufacturing machines, PLC (Programmable Logical Control) is required. The PLC is used to drive the above the manufacturing process. The ICS-10x can be set to TCP server mode and connect the PLC. The administrator can configure and set command settings through Fast Ethernet intranet to control the PLC, the administrator and workstation. There is no need for the adminstrators to be always by the side of the I/O machine.

RTU Data Collect – UDP Mode
Connect with RTU (Remote Terminal Unit) to collect and monitor the data of waves, signal and power utilization. The ICS-10x can be used to set up UDP mode and send data over Fast Ethernet to Local server or over Internet to remote server automatically.

Surveillance Motion Control – Pair Connection Mode
Using pair connection along with fiber optic patch cord, the ICS-10x extends RS-232 / RS-422 / RS-485 interface distance from surveillance and scanner to the control keyboard/joystick which is installed in the remote monitoring center.

Serial Port
Interface RS-232 / RS-422 / RS-485
Connector 3-in-1 DB9
Baud Rate (Data Rate) 300bps to 921600Kbps
Character Bits 5,6,7,8
Stop Bit 1, 1.5/2
Flow Control H/W, None
Parity Type Odd, Even, None, Space, Mark
Signals RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-
RS-485(2-wire): Data+, Data-
RS-485(4-wire): Tx+, Tx-, Rx+, Rx-
Fast Ethernet Port
Standard 10/100Base-TX
Connector RJ-45
Distance 100m
Cable Twisted-pair
Protection Built-in 1.5KV magnetic isolation
Hardware
LED Indicators System: Power
TP Port: Link / Active
Serial Port: Serial port mode, RS-232, RS-422 or RS-485
Management Web Management
PLANET Smart Discovery Utility 
Virtual COM Utility Platform Supports Windows Base Only:
Windows XP
Windows Server 2003
Windows 7
Windows Server 2008
Windows 8 (Must install latest version of WinPcap)
Windows Server 2012 (Must install latest version of WinPcap)
Windows 10
Operation Mode TCP Server
TCP Client
UDP Client
Virtual COM
Telnet Sever
Pair Connection-Local(Master)
Pair Connection-Pemote(Slave)
Dimensions (W x D x H) 97 x 70 x 26 mm
Weight 200g
Power Supply External Power Adaptor 5V DC / 2A max.
Power Consumption 5.5 watts (max)
Mechanical Metal
Environment Operating Temperature: 0~50 degrees C
Storage Temperature: -10~70 degrees C
Operating Humidity: 10%~90% RH
Storage Humidity: 5%~90% RH
Emissions FCC Class A, CE Certification Class A
Standards • IEEE 802.3 10Base-T, 
• IEEE 802.3u 100Base-TX
• EIA / TIA RS-232 / 422 / 485
Regulatory Approval RoHS
Compatible Media Converter Chassis MC-700 / MC-1500/ MC-1500R
Note Reset Button on the rear panel for reset to factory default

Product Vragen

Stel een vraag







Stel een vraag


Sorteren op