Planet LRP-201ET
€ 189,00 (exkl. MwSt.)
€ 228,69 (inkl. MwSt.)
– Long Reach ULTRA POE Extender
– Industrial design
– 1-port 10/100/1000T Ultra POE
– 1-port Coax/UTP Long Reach POE
– -20 ~ +70 degrees C
4 vorrätig (kann nachbestellt werden)
PLANET Long Reach PoE solution is designed to extend IP Ethernet transmission and inject power simultaneously into a remote ultra PoE compliant powered device (PD) beyond the 100 meters distance limit of Ethernet.
Powerful PoE over Coaxial/UTP Extender
The LRP-201ET, a PLANET Long Reach PoE solution, is an Industrial Single-port 10/100/1000T Ultra PoE over Coaxial/UTP Extender featuring long range data and power transmission over any existing coaxial, UTP cable or telephone wire for distance up to 600 meters (1,968ft.) and converts power to IEEE 802.3at/bt PoE over another 100-meter Ethernet cable connected to the remote PoE PD. The LRP-201ET provides multi applications for easy plug-n-play operation and deployment in climatically demanding environments with wide temperature range from -20 to 70 degrees C. It makes the installation of remote PoE PDs easier and more efficiently.
IP Ethernet and Power over Long Existing Coaxial/UTP Cable
A normal UTP cable can only be extended up to 100 meters, but with the LRP-201ET, when functioning with the LRP-201HT, the distance for PoE networking can be extended up to 600 meters (1,968ft.) over 75 ohm coaxial cable or up to 400 meters (1,312ft.) over UTP/telephone wire with stable, high-quality video transmission. It eliminates the need for additional remote site power while allowing a single power source to provide power to both LRP extenders and the PoE PD at long range.
Securing Network Connection with 128-bit AES Encryption
Simply by pressing the PAIR button on the LRP-201HT and LRP-201ET, users can easily set up a hassle-free, secure network within minutes. When the PAIR LED turns on, it provides 128-bit AES encryption for network security and data protection.
Plug & Play Installation
With the plug and play feature, the LRP-201ET can be used immediately without the need of configuration and is also compliant with all kinds of IP network protocols. Moreover, the rich diagnostic LEDs on the front panel show the operating status of the individual port and the whole system, enabling the administrator to efficiently manage the network.
Schreibe die erste Bewertung für „Planet LRP-201ET“
Working in pair with PLANET LRP-201HT Long Reach PoE Injector, powered by either the external DC power adapter or PoE++ Ethernet switch, the LRP-201ET’s 802.3at/bt standard PoE output goes to a PoE PD. The LRP-201-KIT, made up of the LRP-201HT and LRP-201ET, can be widely used in Intelligent Transportation Systems (ITS), traffic surveillance, security monitoring, automation control, intelligent residential districts and so on.
The LRP-201ET can function in four different kinds of combinations:
Type 1 –LRP-201HT with PoE power input connects to LRP-201ET via coaxial cable
The LRP injector is powered via IEEE 802.3at/bt PoE and connecting to LRP-201ET with coaxial cable. The IEEE 802.3at/bt compliant PoE PD will automatically be powered by the LRP extender via UTP.
| Functions | LRP Injector | LRP Extender |
| LRP-201HT | LRP-201ET | |
| Power Input | RJ45 with 802.3at/bt PoE input | BNC with DC power over coaxial input |
| Power Output | BNC with DC power over coaxial output | RJ45 with 802.3at/bt PoE output |
Type 2 –LRP-201HT with 48~54V power adapter connects to LRP-201ET via coaxial cable
The LRP injector is powered via the external power adapter and connected to LRP-201ET via coaxial cable. The IEEE 802.3at/bt compliant PoE PD will automatically be powered by the LRP extender via UTP.
| Functions | LRP Injector | LRP Extender |
| LRP-201HT | LRP-201ET | |
| Power Input | Power adapter with 48~54V DC in | BNC with DC power over coaxial input |
| Power Output | BNC with DC power over coaxial output | RJ45 with 802.3at/bt PoE output |
Type 3 – LRP-201HT with PoE power input connects to LRP-201ET via UTP cable
The LRP injector is powered via IEEE 802.3at/bt PoE and connected to LRP-201ET via UTP cable. The IEEE 802.3at/bt compliant PoE PD will automatically be powered by the LRP extender via UTP.
| Functions | LRP Injector | LRP Extender |
| LRP-201HT | LRP-201ET | |
| Power Input | RJ45 with 802.3at/bt PoE input | UTP with DC power over UTP input |
| Power Output | UTP with DC power over UTP output | RJ45 with 802.3at/bt PoE output |
Type 4 – LRP-201HT with 48~54V power adapter connects to LRP-201ET via UTP cable
The LRP injector is powered via the external power adapter and connected to LRP-201ET via UTP cable. The IEEE 802.3at/bt compliant PoE PD will automatically be powered by the LRP extender via UTP.
| Functions | LRP Injector | LRP Extender |
| LRP-201HT | LRP-201ET | |
| Power Input | Power adapter with 48~54V DC in | UTP with DC power over UTP input |
| Power Output | UTP with DC power over UTP output | RJ45 with 802.3at/bt PoE output |
| Hardware Specifications | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ethernet Interface | Copper 10/100/1000BASE-T RJ45 Auto-negotiation/ Auto-MDI/MDI-X Power over Ethernet Standard IEEE 802.3at/bt PoE PSE PoE Output 53V DC, 1.2A max. PoE Budget Up to 60 watts PoE Mode Pair 1 End-span: 1/2 (-), 3/6 (+) Pair 2 Mid-span: 4/5 (+), 7/8 (-) Data Rate 100/100/1000Mbps Cabling Cat. 5e or above Maximum Distance 100 meters Maximum Frame sizes 1522bytes |
||||||||||||||||||||
| Long Reach PoE Interface | Connectivity 1 x RJ45 female connector Long Reach PoE over UTP PD 1 x BNC female connector Long Reach PoE over coaxial PD Power Input 40~54V DC Power Pin Assignment Coaxial - BNC center pole: DC+ - BNC shield: DC- UTP - RJ45 Pins 1, 3, 5, 7: VCC+ - RJ45 Pins 2, 4, 6, 8: VCC- Cabling Coaxial - Coaxial cable: 75 ohm - RG-6/U cable, less than 12Ω/1000 ft. - RG-59/U cable, less than 30Ω/1000 ft. UTP - Cat. 5e/6 UTP cable - EIA/TIA-568 100-ohm STP Maximum Distance Coaxial - Max. 200m with PoE++ output (656ft.) - Max. 400m with PoE+ output (1312ft.) - Max. 600m with PoE output (1,968ft.) UTP - Max. 100m with PoE++ output (328ft.) - Max. 200m with PoE+ output (656ft.) - Max. 300m with PoE output (984ft.) - Max. 400m with PoE output (1,312ft.) Long Reach Ethernet Standard ITU-T G.hn Modulation Type OFDM Security 128-bit AES encryption Frequency Band 1 ~ 100 MHz Multiple nodes Supports up to 4 LRP extenders within 0.6km LRP Compatibility LRP-201HT- 1-Port LRP Injector |
||||||||||||||||||||
| LRP Coaxial Performance |
|
||||||||||||||||||||
| LRP UTP Performance |
|
||||||||||||||||||||
| LED Indicators | - PWR - SYS - PAIR - PoE-in-Use - LNK/ACT |
||||||||||||||||||||
| ESD Protection | 6KV DC | ||||||||||||||||||||
| PAIR Button | Press for 3 sec to join LRP-201HT | ||||||||||||||||||||
| Reset Button | Press over 10 sec to return to factory default | ||||||||||||||||||||
| Enclosure | IP30 slim type metal case | ||||||||||||||||||||
| Installation | DIN-rail kit or wall-mount ear | ||||||||||||||||||||
| Dimensions (W x D x H) | 135 x 87.8 x 32 mm | ||||||||||||||||||||
| Weight | 510g | ||||||||||||||||||||
| Power Requirements | - BNC Power over Coaxial Input: 40~54V DC, 1.8A max. - RJ45 Power over Ethernet Input: 40~54V DC, 1.8A max. |
||||||||||||||||||||
| Standards Conformance | |||||||||||||||||||||
| Standards Compliance | IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 3 IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet |
||||||||||||||||||||
| Regulatory Compliance | FCC Part 15 Class A, CE | ||||||||||||||||||||
| Environment | |||||||||||||||||||||
| Temperature | Operating: -20~70 degrees C Storage: -30~75 degrees C |
||||||||||||||||||||
| Humidity | Operating: 5~95% (non-condensing) Storage: 5~95% (non-condensing) |
||||||||||||||||||||
| Standard Accessories | |||||||||||||||||||||
| Package Contents | - LRP-201ET - User's Manual - Wall-mount Kit - RJ45 Dust Cap x 2 - Warning Sticker |
||||||||||||||||||||
| Note | *Please do not connect any Ethernet device to LRP IN Port of the LRP-201ET; otherwise, it will damage the Ethernet device. | ||||||||||||||||||||
Ähnliche Produkte
Power over Ethernet
– PoE long reach over UTP
– 1-poort
– afstanden tot 500 meter
– tot 25 watt PoE
– -20 ~ +75 graden C
– Plug n Play
€ 204,00 (exkl. MwSt.)
€ 246,84 (inkl. MwSt.)
Managed Industriëller Ethernet Switch
– 16 port 10/100/1000T Gigabit RJ45
– 16 port IEEE802.3at PoE+ injector
– 2 port 10/100/1000BASE-T Gigabit
– 2 port 1G/2.5G SFP
– PoE Management features
– -40 ~ +75 degr C operating temp.
€ 779,00 (exkl. MwSt.)
€ 942,59 (inkl. MwSt.)
Power over Ethernet
– 1-poort Long Reach PoE Extender
– Coax kabel
– Plug en Play
– IEEE802.3 af en at
– -20 tot +70 graden C temp. bereik
€ 221,00 (exkl. MwSt.)
€ 267,41 (inkl. MwSt.)
Managed Industriëller Ethernet Switch
– DC voedingsadapter
– Din-rail montage geschikt
– Vermogen 75Watt
– Uitgangsspanning: 48Volt DC
€ 49,00 (exkl. MwSt.)
€ 59,29 (inkl. MwSt.)
PoE Switch
– 8-port coaxial connections
– Long Reach PoE
– 2-port 10/100/1000T
– 2-port 100/1000X SFP
– Managed switch
– Up to 1000 meters
€ 735,00 (exkl. MwSt.)
€ 889,35 (inkl. MwSt.)
DIN-Rail Gigabit Converter
– 1000Base-SX naar 10/100/1000T PoE 550m
– Industriële Media Converter
– SC Fiber Interface Multi Mode
– IP30 DIN rail en Wall-mount ontwerp
– -40 ~ +75 graden C.
€ 149,95 (exkl. MwSt.)
€ 181,44 (inkl. MwSt.)
Industrielle Power over Ethernet
– 1-prt UPoE – 4-Prt 802.3af/at Extender
– Gigabit
– Industrieel ontwerp
– Vergroot bereik van PoE+Data – 100 mtr
– 30 Watt PoE per poort
€ 129,95 (exkl. MwSt.)
€ 157,24 (inkl. MwSt.)
Managed Industriëller Ethernet Switch
– Industrial managed L2+ switch
– 4-port 10/100/1000T Ultra PoE
– 1-port 10/100/1000T
– 2-port 100/1000X SFP
– IP30 Aluminium case
– -40 ~ +75 degrees C temp. range
€ 429,00 (exkl. MwSt.)
€ 519,09 (inkl. MwSt.)
Bewertungen
Es gibt noch keine Bewertungen.