
Planet FGSD-1011HP
Artikelnr. Pl_FGSD-1011HP
- 8-poort 10/100TX Switch
- 8-poort 802.3at POE+
- 1-poort 10/100/1000T
- 1-poort 100/1000X SFP
- Desktop switch - 120 WATTS
Op voorraad (3)
Bestel nu, wij verzenden maandag.
3 op voorraad
- 15 jaar Intercel-partner
- Persoonlijk advies, 085 401 9230
Gecontroleerd doorFrans Maas Specificaties
| Poe Type | Switch |
|---|---|
| stackable | nee |
| PoE Power | High Power |
| PoE Norm | IEEE 802.3af/at |
| Netwerksnelheid | 10/100/1000 Mbps |
| PoE systeem | Ja |
| Aantal Poorten | 8-poort |
| Hardware Specifications | |
| 10/100Mbps Ports | 8 10/100BASE-TX MDI/MDI-X RJ45 ports |
| Gigabit Ports | 1 10/100/1000BASE-T MDI/MDI-X RJ45 port |
| SFP Slot | 1 100/1000BASE-X SFP/mini-GBIC interface |
| PoE Inject Port | 8-port with 802.3af/at PoE injector function (Ports 1 to 8) |
| LED Display | System: Power (Green) 10/100BASE-TX RJ45 Interface: PoE (Orange, Ports 1 to 8) LNK/ACT (Green, Ports 1 to 8) 10/100/1000BASE-T RJ45 Interface: 1000Mbps LNK/ACT (Green, Port 9) 100/1000BASE-X SFP Interface: 1000Mbps LNK/ACT (Green, Port 10) |
| DIP Switch | 100m distance in standard mode 250m distance in extend mode (based on the cable category) |
| Switch Architecture | Store and Forward switch architecture |
| MAC Address Table | 4K MAC address table with auto learning function |
| Switch Fabric | 5.6Gbps |
| Switch Throughput | 4.16Mpps @64bytes |
| Maximum Packet Size | 9K bytes |
| Flow Control | Back pressure for half duplex; IEEE 802.3x pause frame for full duplex |
| Power Requirements | AC 100~240V, 2.5A max. |
| Power Consumption | 135 watts, 463.2 BTU |
| Dimensions (W x D x H) | 220 x 150 x 44 mm |
| Weight | 1220g |
| ESD Protection | Contact discharge of ±6KV DC Air discharge of ±8KV DC |
| Surge Immunity | ±4KV |
| Power over Ethernet | |
|---|---|
| PoE Standard | IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type | End-span |
| Power Pin Assignment | 1/2 (+), 3/6 (-) |
| PoE Power Output | Per Port 52V DC, 600mA. max. 30 watts (IEEE 802.3at) Per Port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af) |
| PoE Power Budget | 120 watts |
| Number of PDs, 7 watts | 8 |
| Number of PDs, 15.4 watts | 8 |
| Number of PDs, 30 watts | 4 |
| Standard Conformance | |
| EMI Safety | CE, FCC |
| Standard Compliance | |
| IEEE 802.3 | Ethernet |
| IEEE 802.3u | Fast Ethernet |
| IEEE 802.3ab | Gigabit 1000BASE-T |
| IEEE 802.3z | Gigabit SX/LX |
| IEEE 802.3x | Flow Control |
| IEEE 802.3af | Power over Ethernet |
| IEEE 802.3at | Power over Ethernet Plus |
| Environment | |
| Operating Environment | 0 ~ 50 degrees C |
| Storage Environment | -10 ~ 70 degrees C |
| Operating Humidity | 5 ~ 95%, relative humidity, non-condensing |
| Storage Humidity | 5 ~ 95%, relative humidity, non-condensing |
Toepassingen
- Perfectly Integrated Solution for IP PoE Camera and NVR SystemParticularly designed for the growing popular IP Surveillance applications, the FGSD-1011HP 802.3at PoE Switch is positioned as a Surveillance Switch for quick and easy PoE IP camera deployment with power feeding. The FGSD-1011HP provides both 802.3at and 802.3af PoE functions along with 8 10/100BASE-TX ports featuring 30-watt 802.3at or 15.4-watt 802.3af PoE in RJ-45 copper interfaces, 1 extra Gigabit TP and 1 extra Gigabit SFP uplink interface supporting high-speed transmission of surveillance images and videos.
- IP Office Department/Workgroup PoE SwitchWith the business office expansion, the additional telephones required can be installed with lower cost via the implementation of PoE IP telephony system than that of the traditional circuit wiring telephony system. The FGSD-1011HP 802.3af/at PoE Switch helps enterprises to create an integrated data, voice, and powered network. The IEEE 802.3af compliant IP phones can be installed without an additional power cable because the power can be provided via the standard Ethernet cable from the connected FGSD-1011HP.
- The wireless AP group, PoE IP phones and analog telephony adapter work perfectly with the FGSD-1011HP, which injects power through the Ethernet cables. With the FGSD-1011HP, IP telephony deployment becomes more reliable and cost-effective, thus helping enterprises save tremendous costs when upgrading from the traditional telephony system to IP telephony communications infrastructure.
Omschrijving
Gecentraliseerde Power Distributie voor HD IP Bewakingssystemen
De FGSD-1011HP, een nieuw lid van de PLANET 802.3at PoE Fast Ethernet Switch familie, biedt 8-poort 10/100Mbps 802.3af/at Power over Ethernet, 1 Gigabit poort en 1 Gigabit SFP poort met een totaal POE budget van 120 Watt. Het power budget is ruim voldoende voor elke netwerk applicatie met Fast Ethernet transmissie snelheden. De acht 802.3af/at PoE poorten bieden een PoE power injector functie die in staat is om 8 IEEE 802.3at compatibele apparaten te voeden. De FGSD-1011HP bevat tevens een eenvoudige, kostenefficiënte en non-blocking wire-speed prestatie. De unit heeft een 9-inch compacte metalen behuizing die geschikt is voor plaatsing op uw bureau in SOHO omgeving of in afdeling netwerk toepassingen.

Afstand Uitgebreid voor Transmissie van Power en Data
De ingebouwde solid DIP switch kan als "Standard", "VLAN" en "Extend" ingesteld worden. De FGSD-1011HP werkt als een normale IEEE 802.3af/at PoE Switch in de "Standard" setting. De "VLAN" setting biedt port-based VLAN functies die ervoor zorgen dat de IP camera’s multicast of broadcast storm erkaar niet beïnvloeden.

In de "Extend" setting, werkt de FGSD-1011HP op een per-poort basis met 10Mbps duplex werking maar kan 30-watt PoE power leveren over een afstand van wel 250 meter en zo de 100m limiet van Ethernet UTP kabel overtreffend. Met deze gloednieuwe feature levert de FGSD-1011HP een extra oplossing voor 802.3af/at PoE afstand verlenging, en daarmee een besparing op de Ethernet kabel installatie. Its VLAN isolation function isolates each port so as to prevent broadcast storm and defend DHCP spoofing in the “Extend” operation mode.


Two Gigabit Uplink Ports
The FGSD-1011HP comes with two uplink ports with 1000Mbps transfer rate to ensure high-speed data and video transmission, reliable assurance for connection between the surveillance system and outside network where the eight PoE+ ports can be used to their full potential.
Fiber-Optic Link Capability Enables Extension of Network Deployment
The mini-GBIC slot built in the FGSD-1011HP supports SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver based on the transmission distance or the transmission speed required to extend the network efficiently. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications to uplink to backbone switch and monitoring center in long distance.

Robust Protection
The FGSD-1011HP protects against the ESD 4KV surge to improve product stability and also protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.
Environment-friendly, Fanless Design for Silent Operation
The FGSD-1011HP comes with a desktop-sized, compact metal housing, making the placement of the unit convenient. It features a ventilated construction in which a cooling fan is not necessary, thereby making its operation noiseless. Moreover, the FGSD-1011HP is able to operate reliably and stably in any environment without affecting its performance. The deployment of PoE PDs with constant power feeding can be easily and quickly done.
Easy Installation and Cable Connection
As data transfer and high PoE are transmitted over a cable, the FGSD-1011HP is able to reduce the need of extended cables and electrical outlets on the wall, ceiling or any unreachable place. It helps to lower the installation costs and simplify the installation effort. All RJ45 copper interfaces of the FGSD-1011HP support 10/100/1000Mbps auto-negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cable. It also supports standard auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.

Vragen
Wanneer wordt mijn bestelling verzonden?
Op een werkdag vóór 15:00 uur besteld, verzenden we dezelfde dag nog. Na 15:00 uur of in het weekend verzenden we de volgende werkdag.
Zijn de prijzen exclusief btw?
Ja. De winkelprijs is exclusief btw. U ziet ook het bedrag inclusief btw. De productgegevens voor zoekmachines gebruiken de prijs exclusief btw.
Kan ik een oud typenummer opzoeken?
Ja. Op de homepage zoekt u een Wetac- of Intercel-nummer. U komt bij de opvolger uit als die in de shop staat.





