
Planet VF-101-KIT
Artikelnr. VF-101-KIT
- VF-10x-T 1 video over fiber transm
- VF-10x-R 1 video over fiber receive
- 2 units
Op voorraad (2)
Bestel nu, wij verzenden maandag.
2 op voorraad
- 15 jaar Intercel-partner
- Persoonlijk advies, 085 401 9230
Gecontroleerd doorFrans Maas Specificaties
| Aantal Poorten | 1-poort |
|---|---|
| PoE systeem | Nee |
| Video Characteristic | |
| Video Channel | 1 channel Bi-direction |
| Signal Mode | NTSC / PAL / SECAM |
| Video Connector | BNC |
| Video Input / Output Impedance | 75ohm / unbalanced interface |
| Video Input / Output Voltage | 1.0 Vpp / Typical peak-peak value |
| Video Bandwidth | 6.5MHz |
| Video Digital Bit Width | 8/10 bit |
| Differential Gain(DG) | <1.3% (Typical Value) |
| Differential Phase(DP) | <1.3° (Typical Value) |
| SNR Weighted | 63dB (Typical Value) |
| Data Interface | |
|---|---|
| Data Channel | 1 channel |
| Physical Protocol | RS-485 |
| Operation Mode | Simplex |
| Data Connector | 3 pin terminal block with screw clamps |
| Data Rate | DC-115.2Kbps |
| Data Distance | RS-485: 0-1200m |
| Bit Error Rate (BER) | < 10ns |
| Optical Interface | |
| Optical Connector | VF-101-KIT:ST VF-102-KIT:FC VF-102SC-KIT:SC VF-102S15-KIT:SC VF-106-KIT:WDM |
| Distance | VF-101-KIT:2km for multi-mode VF-102-KIT:20km for single mode VF-102SC-KIT:2km for multi-mode VF-102S15-KIT:15km for single mode VF-106-KIT:20km for single mode |
| Optical Wavelength | VF-101-KIT VF-101-T:TX & RX: 1310nm VF-101-R:TX & RX: 1310nm VF-102-KIT VF-102-T:TX: 1310nm, RX: 1550nm VF-102-R:TX: 1550nm, RX: 1330nm VF-102SC-KIT VF-102SC-T:TX & RX: 1310nm VF-102SC-R:TX & RX: 1310nm VF-102S15-KIT VF-102S15-T:TX & RX: 1310nm VF-102S15-R:TX & RX: 1310nm VF-106-KIT VF-106-T:TX: 1310nm, RX: 1550nm VF-106-R:TX: 1550nm, RX: 1330nm |
| Launch Power (dBm) | VF-101-KIT Max. : -14, Min. : -19 VF-102-KIT Max. : -7, Min. : -14 VF-102SC-KIT Max. : -14, Min. : -19 VF-102S15-KIT Max. : -7, Min. : -20 VF-106-KIT Max. : -8, Min. : -14 |
| Receive Sensitivity (dBm) | VF-101-KIT:-34.5 VF-102-KIT:-32 VF-102SC-KIT:-34.5 VF-102S15-KIT:-28 VF-106-KIT:-31 |
| Max. Input Power (dBm) | VF-101-KIT:-14 VF-102-KIT:0 VF-102SC-KIT:-14 VF-102S15-KIT:-8 VF-106-KIT:0 |
| Cable | 50/125μm or 62.5/125μm multi-mode cable 9/125μm single mode cable |
| Hardware Specifications | |
| LED Indicators | • One Power • One for Video - Green, Link • One for Fiber Optic - Green, Link |
| Dimensions (W x D x H) | 94 x 70 x 26 mm |
| Weight | 215g |
| Power Requirements | 5V / 2A |
| Power Consumption | 4.8 watts (maximum) |
| Mechanical | Metal |
| Installation | Wall-mountable, DIN-rail (with optional kit), chassis installation |
| Compatible Converter Chassis | MC-700 / MC-1500 / MC-1500R |
| Standards Conformance | |
| Regulation Compliance | FCC Part 15 Class A, CE |
| Environment | |
| Operating | Temperature: -10 ~ 60 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage | Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
| Ordering Information | |
| VF-101-KIT | 1-Channel Video over Fiber Bundled Kit (VF-101-T + VF-101-R / ST / MM / 2km) |
| VF-102-KIT | 1-Channel Video over Fiber Bundled Kit (VF-102-T + VF-102-R / FC / SM / 20km) |
| VF-102S15-KIT | 1-Channel Video over Fiber Bundled Kit (VF-102S15-T + VF-102S15-R / SC / SM / 15km) |
| VF-102SC-KIT | 1-Channel Video over Fiber Bundled Kit (VF-102SC-T + VF-102SC-R / SC / MM / 2km) |
| VF-106-KIT | 1-Channel Video over Fiber Bundled Kit (VF-106-T + VF-106-R / WDM / SM / 20km) |
Toepassingen
- The VF-10x-KIT consists of 1 channel video over fiber optical transceiver and receiver to transmit video and RS-485 signal through a reliable single mode / single fiber link. It is an ideal, cost-effective solution for surveillance system that requires high display quality and high performance signal transmission over long distances. The VF-10x-KIT can be installed easily by plug and play, meaning the operator does not need to configure the pair of the video over fiber transmission in advance.
- The transmitter and receiver can work stand-alone or slotted into a rack-mountable media converter chassis. The flexible and maintenance-free design fits in with different installation environments. Up to 20km distance of video camera deployment with one VF-10x-KIT ideally suits the following applications:
- • Intelligent Transportation Systems (ITS) • Toll Collection • Traffic Surveillance • Air Traffic Management (ATM) • Rail Signaling • Perimeter Alarms and Area Monitors • Telemedicine and Teleconference • Industrial Surveillance • Intelligent Building
Omschrijving
Long Distance Analog Surveillance Transmission System
The analog cameras and DVRs are still applied mostly in traditional surveillance systems while the main stream turns to IP-based surveillance gradually. To help the analog camera deployment in long distances to provide high video transmission quality and reliable signal, PLANET develops the Video over Fiber media converter which successfully integrates the video signal and fiber optic transmission into a compact size mini box. The Video over Fiber media converter enables the videos to be delivered in high quality up to 20km long distance by the intelligent encoding / decoding technology. It is ideal for extending the distance and signal conversion by transmitting the video and data over the fiber-optic cable.

Fiber Optic Communication for Video and Serial Data
This Video over Fiber Converter kit consists of a Video Transmitter and a Video Receiver:
• VF-10x-T: 1-channel Video over Fiber Transmitter
• VF-10x-R: 1-channel Video over Fiber Receiver
|
Model Name |
Video Type |
Fiber Speed |
Optical Distance |
Optical Connector |
|
VF-101G |
AHD/TVI/CVI/CVBS |
1.25G/84M |
20km in single mode |
ST |
|
VF-102G |
FC |
|||
|
VF-106G |
WDM-SC |
It is a digital fiber-optic transmission system which brings customer a cost-effective solution for transmission of 1 channel uncompressed digital video and 1 reverse RS-485 a sync-data over one single fiber cable. It is an adjustable free device providing high quality and real-time video transmission. The system can be widely used in Intelligent Transportation Systems (ITS), traffic surveillance, security monitoring, automation control, intelligent residential districts and so on.

Easy Installation
The VF-10x-KIT media conversion installation is quite easy by simply plug and play. They can be used as a stand-alone unit or as a slide-in module to the PLANET Media Converter Chassis (MC-700, MC-1500 and MC-1500R). When working with the media converter chassis, the media converter chassis provides DC power to VF-10x-T or VF-10x-R to maintain the video over fiber-optic transmission system at the central location.

Vragen
Wanneer wordt mijn bestelling verzonden?
Op een werkdag vóór 15:00 uur besteld, verzenden we dezelfde dag nog. Na 15:00 uur of in het weekend verzenden we de volgende werkdag.
Zijn de prijzen exclusief btw?
Ja. De winkelprijs is exclusief btw. U ziet ook het bedrag inclusief btw. De productgegevens voor zoekmachines gebruiken de prijs exclusief btw.
Kan ik een oud typenummer opzoeken?
Ja. Op de homepage zoekt u een Wetac- of Intercel-nummer. U komt bij de opvolger uit als die in de shop staat.



