Ga naar inhoud

Maandag verzonden Gratis verzending in NL vanaf € 150 Verzending door de hele EU

Prijzen tonen

Planet

Planet IGS-4215-4P4T

Artikelnr. IGS-4215-4P4T

- 8-port 10/100/1000T
- 4-port 802.3at PoE
- Industrial Switch
- Managed
- Temp. range -40 ~ +75 degrees C

Poe TypeSwitch
stackablenee
PoE PowerHigh Power
PoE NormIEEE 802.3at
Netwerksnelheid10/100/1000 Mbps
PoE systeemJa
€ 309,00 excl. btw€ 373,89 incl. btw

Op voorraad (6)

Bestel nu, wij verzenden maandag.

6 op voorraad (kan nabesteld worden)

Frans MaasGecontroleerd doorFrans Maas

Specificaties

Poe TypeSwitch
stackablenee
PoE PowerHigh Power
PoE NormIEEE 802.3at
Netwerksnelheid10/100/1000 Mbps
PoE systeemJa
Aantal Poorten8-poort
Hardware Specifications
Copper Ports8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
PoE Injector Port4 ports with 802.3af/802.3at PoE injector function (Port-1 to Port-4)
Console1 x RS232-to-RJ45 serial port (115200,8, N, 1)
Switch ArchitectureStore-and-Forward
Switch Fabric16Gbps/non-blocking
Switch Throughput@64 bytes11.9Mpps@64 bytes
MAC Address Table8K entries
Shared Data Buffer4.1 megabits
Flow ControlIEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame10 Kbytes
Reset Button< 5 sec: System reboot
> 5 sec: Factory default
LED3 x LED for System and Power: 
 ■ Green: DC Power 1
 ■ Green: DC Power 2
 ■ Green: Power Fault
2 x LED for PoE Copper Port (Port-1~Port-4):
 ■ Green: LNK/ACT
 ■ Orange: PoE-in-use
2 x LED for 10/100/1000T Copper Port (Port-5~Port-8):
 ■ Green: LNK/ACT
 ■ Orange: 1000Mbps
4 x LED for PoE Power Usage (W)
 ■ Orange: 30, 60, 90 and 120W
ConnectorRemovable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
AlarmOne relay output for power failure. Alarm relay current carry ability: 1A @ 24V AC
Power Requirements48~56V DC, 3.5A (max.)
Power Consumption/ Dissipation5.04 watts, 17.1BTU (Standby without PoE function)
7.28 watts, 23 BTU (Full loading without PoE function)
151.28 watts, 516.1 BTU (Full loading with PoE function)
Dimensions (W x D x H)161 x 107 x 72 mm
Weight1001g
ESD Protection6KV DC
EnclosureIP30 aluminum case
InstallationDIN-rail kit and wall-mount ear

Toepassingen

Industriële-kwaliteit PoE Switch voor Gebouw Automatisering en Beveiliging
De IGS-4215-4P4T is geschikt voor toepassing in gebouwen waar beveiliging hoog in het vaandel staat. Met de 4Suitable for buildings where security is strictly to be enforced, the IGS-4215-4P4T, with 4 PoE, in-line power interfaces, can easily build a power centrally controlled for an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment. For instance, 4 PoE IP cameras or PoE wireless APs can be easily installed for surveillance demands or a wireless roaming environment in the industrial area can be built. Without the power-socket limitation, the IGS-4215-4P4T makes the installation of IP cameras or wireless APs easier and more efficiently.

Omschrijving

Ideal, Cost-effective, Manageable PoE Solution for Hardened Environment
Designed to be installed in heavy industrial demanding environments, the IGS-4215-4P4T is the new generation of PLANET Industrial-grade, DIN-rail type L2/L4 Managed Gigabit PoE+ Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 4 10/100/1000BASE-T ports featuring 30-watt 802.3at PoE+ and 4 additional Gigabit copper ports. The IGS-4215-4P4T is able to operate reliably, stably and quietly in any environment without affecting its performance. It comes with a total power budget of up to 144 watts for different kinds of PoE applications and operating temperature ranging from -40 to 75 degrees C in a rugged IP30 metal housing.

Built-in Unique PoE Functions for Powered Devices Management
As it is the managed PoE switch for surveillance, wireless and VoIP networks, the IGS-4215-4P4T features the following special PoE management functions:
 ■ PD alive check
 ■ Scheduled power recycling
 ■ PoE schedule
 ■ PoE usage monitoring

Intelligent Powered Device Alive Check
The IGS-4215-4P4T can be configured to monitor connected PD (Powered Device) status in real time via ping action. Once the PD stops working and responding, the IGS-4215-4P4T will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.

Scheduled Power Recycling
The IGS-4215-4P4T allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.

PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental protection, the IGS-4215-4P4T can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours.

PoE Usage Monitoring and Intelligent LED Indicator for Real-time PoE Usage
Via the power usage chart in the web management interface, the IGS-4215-4P4T enables the administrator to monitor the status of the power usage of the connected PDs in real time. Thus, it greatly enhances the management efficiency of the facilities. Moreover, the IGS-4215-4P4T helps users to monitor the current status of PoE power usage easily and efficiently via its advanced LED indication. Called “PoE Power Usage”, the front panel of the IGS-4215-4P4T has four LED indicators of different power usages.

Environmentally Hardened Design
With the IP30 aluminum industrial case, the IGS-4215-4P4T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioner. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-4215-4P4T can be placed in almost any difficult environment.

IPv6/IPv4 Dual Stack Management
Supporting both IPv6 and IPv4 protocols, the IGS-4215-4P4T helps the system integrators to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 network is set up.

Robust Layer 2 Features
The IGS-4215-4P4T can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop and BPDU Guard, IGMP Snooping, and MLD Snooping. Via the link aggregation, the IGS-4215-4P4T allows the operation of a high-speed trunk to combine with multiple ports such as a 16Gbps fat pipe, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain.

Efficient Traffic Control
The IGS-4215-4P4T is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast/unicast storm control, per port bandwidth control, 802.1p/CoS/IP DSCP QoS priority and remarking. It guarantees the best performance in VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.

Friendly and Secure Management
For efficient management, the IGS-4215-4P4T is equipped with web, Telnet and SNMP management interfaces. With the built-in web-based management interface, the IGS-4215-4P4T offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard SNMP, the switch can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet. Moreover, the IGS-4215-4P4T offers secure remote management by supporting SSH, SSL and SNMP v3 connections which encrypt the packet content at each session.

Advanced Network Security
PLANET IGS-4215-4P4T offers a comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, the IGS-4215-4P4T also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discarded ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.

Vragen

Wanneer wordt mijn bestelling verzonden?

Op een werkdag vóór 15:00 uur besteld, verzenden we dezelfde dag nog. Na 15:00 uur of in het weekend verzenden we de volgende werkdag.

Zijn de prijzen exclusief btw?

Ja. De winkelprijs is exclusief btw. U ziet ook het bedrag inclusief btw. De productgegevens voor zoekmachines gebruiken de prijs exclusief btw.

Kan ik een oud typenummer opzoeken?

Ja. Op de homepage zoekt u een Wetac- of Intercel-nummer. U komt bij de opvolger uit als die in de shop staat.

€ 309,00 excl. btw€ 373,89 incl. btw In winkelwagen