Ga naar inhoud

Morgen verzonden Gratis verzending in NL vanaf € 150 Verzending door de hele EU

Prijzen tonen

Planet

Planet FGSW-1816HPS

Artikelnr. Pl_FGSW-1816HPS

- 16-poort 10-100TX 802.3at POE+
- 2-poort Gigabit TP/SFP Combo
- Layer 2 Managed Switch
- QinQ VLAN
- IGMP/MLD Snooping

Poe TypeSwitch
PoE PowerHigh Power
PoE NormIEEE 802.3at
Netwerksnelheid10/100 Mbps
PoE systeemJa
Aantal Poorten16-poort
€ 216,00 excl. btw€ 261,36 incl. btw

Op voorraad (2)

Bestel nu, wij verzenden morgen.

2 op voorraad (kan nabesteld worden)

Frans MaasGecontroleerd doorFrans Maas

Specificaties

Poe TypeSwitch
PoE PowerHigh Power
PoE NormIEEE 802.3at
Netwerksnelheid10/100 Mbps
PoE systeemJa
Aantal Poorten16-poort
Hardware Specifications
Copper Ports16 10/100BASE-TX RJ45 Auto-MDI/MDI-X ports
PoE Injector Port16 802.3af/802.3at PoE+ injector ports
Gigabit Copper Ports2 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots2 1000BASE-X SFP interfaces, shared with Port-17 to Port-18
Switch ArchitectureStore-and-Forward
Switch Fabric7.2Gbps/non-blocking
Switch Throughput@64bytes5.35Mpps @64bytes
MAC Address Table16K entries
Shared Data Buffer4Mb
Flow ControlIEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Maximum Transmit Unit1522 bytes
Reset Button< 5 sec: System reboot
> 5 sec: Factory default
LEDSystem:
 Power (Green)
10/100TX RJ45 Interfaces (Port 1 to Port 16):
 LNK/ACT (Green), PoE-in-Use (Orange)
10/100/1000BASE-T RJ45 / SFP Interfaces (Port 17 to Port 18):
 LNK/ACT (Green), 1000 (Green)
PoE Usage:
 50W, 100W, 150W, 190W (Orange)
Thermal Fan2
Power Requirements100~240V AC, 50/60Hz, 4A (max.)
Power Consumption/DissipationMax.250watts/853BTU
Dimensions (W x D x H)440 x 200 x 44.5 mm,1U height
Weight2.8kg
EnclosureMetal

Toepassingen

  • PDs are Centrally Managed
  • Providing 16 10/100BASE-TX PoE+ ports, in-line power interfaces and two Gigabit TP/SFP combo interfaces, the FGSW-1816HPS can easily build an IP camera system for the enterprises where its power is centrally controlled. It can work with one 16-channel NVR to perform comprehensive security monitoring with 16 IP cameras via one Gigabit TP/SFP combo port. The FGSW-1816HPS comes with non-blocking design, desktop size and SFP fiber-optic modules, bringing flexibility to building a network infrastructure at a low cost.
  • High-performance PoE Network Connectivity
  • All of its ports are 802.3af/at compliant, thus making high-performance Fast Ethernet network connectivity with PoE IP telephones, PoE IP cameras, PoE wireless access points and other devices possible, all at reasonable costs. The FGSW-1816HPS improves the network efficiency and protects the network clients with its following powerful features:
  • Layer 2 to Layer 4 security
  • QoS, 802.1Q VLAN, static trunk, LACP
  • Multicast IGMP snooping

Omschrijving

PLANET’s newly-revised FGSW-1816HPS Layer 2 PoE+ Managed Switch is designed for enterprises and industries where a network of PDs can be centrally managed. The Switch’s management functions have been enhanced to include intelligent PoE management, IPv6 management, ACL, GVRP, and more.

Cost-optimized Managed PoE+ Switch with L2/L4 Switching and Security

PLANET FGSW-1816HPS is an ideal Managed PoE+ Switch which provides cost-effective advantage to local area network and is widely accepted in the SMB office network. It offers intelligent Layer 2 data packet switching and management functions, friendly web user interface and stable operation. The model complies with IEEE 802.3at Power over Ethernet Plus (PoE+) at an affordable price; the FGSW-1816HPS is equipped with 16 10/100BASE-TX Fast Ethernet ports and 2 Gigabit TP/SFP combo interfaces with inner power system. With its 16 Fast Ethernet ports integrated with 802.3at PoE+ injector function and total power budget of up to 220 watts, it offers a rack-mountable, affordable, safe and reliable power solution for SMBs deploying Power over Ethernet networks, or requiring enhanced data security and network traffic management.

Intelligent LED Indicator for Real-time PoE Usage

The FGSW-1816HPS helps users to monitor the current status of PoE power usage easily and efficiently with its advanced LED indication. Called “PoE Power Usage” found on the front panel of the FGSW-1816HPS Layer 2 PoE+ Managed Switch, it has four orange LEDs indicating the range of the current PoE power usage.

Solution for IPv6 Networking

With the support for IPv6/IPv4 protocol, and easy and friendly management interfaces, the FGSW-1816HPS is the ideal choice for IP surveillance, VoIP and wireless service providers to connect with the IPv6 network. It also helps SMBs to step in the IPv6 era with the lowest investment and without having to replace the network facilities even though ISPs establish the IPv6 FTTx edge network.

Built-in Unique PoE Functions for Surveillance Management

As a managed PoE Switch for surveillance network, the FGSW-1816HPS features the following intelligent PoE management functions:

  • Real-time Display of PoE Chipset Temperature 
  • PD Alive Check
  • PoE Port Sequence
  • PoE Schedule

 

Intelligent Powered Device Alive Check

The FGSW-1816HPS can be configured to monitor a connected PD status in real time via ping action. Once the PD stops working and it is without response, the FGSW-1816HPS will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source, thus reducing administrator management burden.

PoE Port Sequence 

To prevent all the PoE ports of the FGSW-1816HPS from being active at the same time when the Switch has booted up, the PoE ports of the FGSW-1816HPS can be configured to allow each port to be activated at an interval time. In addition, the “Delay” setting is to delay power feeding on each port when the FGSW-1816HPS has completely booted up.

 

PoE Schedule for Energy Saving

Besides being used for IP surveillance, the FGSW-1816HPS is certainly applicable to build any PoE network including VoIP and wireless LAN. Under the trend of energy saving worldwide and contributing to the environmental protection on the Earth, the FGSW-1816HPS can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs and enterprises save energy and budget.

Robust Layer 2 Features

The FGSW-1816HPS can be programmed for advanced switch management functions, such as Multiple Spanning Tree Protocol (MSTP), BPDU filtering, BPDU Guard, dynamic port link aggregation, IGMP/MLD snooping, DHCP relay agent, loop detection and GVRP, voice VLAN and the Link Layer Discovery Protocol (LLDP). The Layer 2 protocol included is to help discover basic information about neighboring devices in the local broadcast domain. Other features included are the port-based/802.1Q VLAN and Q-in-Q VLAN, Layer 2/4 QoS, port mirroring, broadcast storm control and bandwidth control.

Enhanced Security and Traffic Control

The FGSW-1816HPS offers the comprehensive Layer 2 to Layer 4 access control list (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP/MAC address or defined typical network applications. The FGSW-1816HPS also provides DHCP Snooping, ARP Inspection and MAC Verification functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. Also included are per port MAC/IP address binding and MAC address binding.  The network administrator can now build highly-secure corporate networks with considerably less time and effort than before.

 

Cybersecurity Network Solution to Minimize Security Risks

The cybersecurity features that virtually need no effort and cost to have included the protection of the switch management and the enhanced security of the mission-critical network. Both SSH and SSL protocols are utilized to provide strong protection against advanced threats. The network administrator can now construct highly-secure corporate networks with considerably less time and effort than before.

 

Efficient Management

For efficient management, the FGSW-1816HPS is equipped with Web, Telnet and SNMP management interfaces. With the built-in Web-based management interface, the FGSW-1816HPS offers an easy-to-use, platform-independent management and configuration facility. By supporting the standard Simple Network Management Protocol (SNMP), the FGSW-1816HPS can be managed via any standard management software. For text-based management, the switch can be accessed via Telnet. Moreover, the FGSW-1816HPS offers secure remote management by supporting SNMPv3 connections which encrypt the packet content at each session.

 

Flexible and Extendable Uplink Solution

The FGSW-1816HPS provides 2 extra Gigabit TP/SFP combo interfaces supporting 10/100/1000BASE-T RJ45 copper to connect with surveillance network devices such as NVR, Video Streaming Server or NAS to facilitate surveillance management. Or through these fiber SFP slots occupied by the 1000BASE-SX/LX SFP (small form-factor pluggable) fiber transceivers, it can be uplinked to a backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2km (multi-mode fiber) to 10/20/40/80/120 kilometers (single-mode fiber or WDM fiber). They are well-suited for applications within the industrial data centers and distributions.

Vragen

Wanneer wordt mijn bestelling verzonden?

Op een werkdag vóór 15:00 uur besteld, verzenden we dezelfde dag nog. Na 15:00 uur of in het weekend verzenden we de volgende werkdag.

Zijn de prijzen exclusief btw?

Ja. De winkelprijs is exclusief btw. U ziet ook het bedrag inclusief btw. De productgegevens voor zoekmachines gebruiken de prijs exclusief btw.

Kan ik een oud typenummer opzoeken?

Ja. Op de homepage zoekt u een Wetac- of Intercel-nummer. U komt bij de opvolger uit als die in de shop staat.

€ 216,00 excl. btw€ 261,36 incl. btw In winkelwagen