4Power NPS41

This 4Power network power switch is the simplest network power switch currently available. All this unit does is switch two outlets controlled by the network.

De Nnetwork Power Switch (NPS) is a small, smart PDU. The NPS allows administrators to access it remotely, switch outlets on and off, and monitor load via the web and SNMP. The unit supports three ways to control the outlet(s):

 -Web-based direct control
- Scheduling, scheduling switching times
– An IT monitor (Ping) to check the equipment
       If the connected IT device does not respond, the NPS11/21/41 will perform a power reset.

Using the 4Power NPS11 and NPS21, you can remotely reset systems that have crashed, for example, via the network/internet.
You no longer need to purchase expensive systems, simply add an NPS to the feed line and you're ready to go.

The 4Power NPS systems are available in three versions:
– NPS-11 with one input and one output. 
– NPS-21 with one input and two outputs. (Two outputs can be switched separately)
– NPS-41 with one input and four outputs. (Four outputs can be switched individually)

The systems are suitable for 10Amp, so a power of approximately 2300 Watts, which should be more than sufficient for most normal applications.
If a higher capacity is required, please contact us.