Planet IPOE-162S

The best industrial Data Link and Power supply for Non-PoE solutions
The IPOE-162S is a Industrial High Power PoE Splitter which can split the 48~56V DC over the existing Ethernet cable into the (selectable) 12Volt of 24Volt DC output voltage. It supports passive 10 / 100 / 1000Mbps Ethernet connection capability and conforms to the IEEE 802.3at High Power over Ethernet standard that up to 25 Watt output power per connected device. To meet the growing industrial applications, the IPOE-162S is designed to operate in a temperature range of -40 to 75 degrees Celsius. The IPOE-162S is the ideal solution for transmitting power directly to traditional network equipment with high power requirements, without the need to install additional outlets and electrical wiring in an industrial environment.

Innovative selectable DC power output voltage
Using the innovative 12/24 volt DIP switch on the front panel, the IPOE-162 can supply either 24 volts DC or 12 volts DC to industrial equipment that doesn't have PoE capabilities. Applications include wireless access points or IP cameras. This significantly increases the flexibility of product applications.

Double Power Output Capability
By supporting up to 25 watts 802.3at power over Ethernet cable, the IPOE-162S can not only handle a single power-hungry load but also distribute the 25 watts of DC power to two non-PoE Ethernet devices simultaneously using a 4-pin terminal block. For example, the two outputs can be used as shown below: 

　　■ IP Camera (Power 1) + Outdoor housing with fan and heater (Power 2)
　　■ IP Camera (Power 1) + Pan & Tilt Motor (Power 2)
　　■ Analog Camera (Power 1) + IP Video Server (Power 2)

Design resistant to harsh environmental conditions
With compact, slim type IP30 industrial case protection, the space saving Industrial High Power PoE Splitter IPOE-162S can be placed in almost any difficult environment. It allows either DIN rail or wall mounting for efficient use of cabinet space. Being able to operate under the temperature range from -40 to 75 degrees C, the IPOE-162S is the ideal product for co-working with Industrial High Power Injector which can feed the power to Non-PoE devices up to 100 meters (328 feet) away on those harsh environments.

Plug and Play, Easy Wiring, Installation
With the IEEE 802.3at Gigabit High Power over Ethernet equipment installed, the system administrator only needs to use a single RJ-45 Ethernet cable to deliver data and power to each device. Furthermore, by connecting the Industrial High Power PoE injector to the IPOE-162S, you can benefit from cost savings, easy network planning, and high network reliability.