Planet IPOE-E302
€ 149,00 (excl. VAT)
€ 180,29 (Incl. VAT)
– Industrial PoE extender
– 1-port in / 2-port out
– IEEE802.3bt POE++
– 3 Gb 10/100/1000Base-T ports
– Extends Data and PoE over 100 meters
4 in stock (can be backordered)
Outdoor 802.3bt PoE++ Solution to Break the RJ45 100m Limit
PLANET IPOE-E302 is an industrial IP67 1-port 802.3bt PoE++ to 2-port 802.3bt/at Gigabit PoE Extender that is specially designed for point to multipoint PoE applications. The IPOE-E302 can support up to 95-watt PoE power can be supplied from a 802.3bt PoE++ of PoH (Power over HDBASE-T) input port and provides up to 65-watt PoE power for 2 PoE output ports, both with the Gigabit Ethernet Data and the 802.3at Power over Ethernet Expanded via UTP cable. The IPOE-E302 offers a simple solution for adding PoE ports without running additional cables, creating a flexible network without the need for external power supplies.
Weatherproof RJ45 Ethernet Connector and Shielded Plug
The IPOE-E302 is ideal for setting up a wide range of outdoor-ready PoE devices, such as outdoor PoE wireless access points, outdoor PoE IP cameras, outdoor PoE IP intercoms, and much more. The IPOE-E302 is equipped with three ports of 3/10/100BASE-T auto-negotiation RJ1000 connectors and three waterproof cable joints for direct connection. Because the unit is equipped with waterproof cable joints, a standard RJ45 connector can be used with a water-resistant cable for a strong connection. With an industrial IP3 rating, you are assured of protection against humidity, dirt, dust, shock, vibration, heat, and cold.
Environmentally Hardened Design
With industrial-level IP67-rated aluminum case, the IPOE-E302 provides a high level of immunity against electromagnetic interference, and is able to protect itself from dust and water ingress and to operate under the temperature range from -40 to 75 degrees C. All these features ensure the highest level of reliability for mission-critical applications in any difficult environment.
Plug and Play, and Easy Cabling Installation
The IPOE-E302 is quite easy to be installed by simply Plug and Play. It is used between a power source equipment (PSE) and a powered device (PD).
The IPOE-E302 is designed in a compact box containing three RJ45 ports, of which one “PoE++ In" port functions as PD input and the other two “PoE+ Out” ports on the other side function as PSE output. The “PoE OUT” port is also the power injector that transmits DC voltage over the Cat5/5e/6 cable and transfers data and power simultaneously to a remote PD without affecting the data transmission performance. It offers a cost-effective and quick solution to double the standard range of PoE from 100 to 200 meters.
Be the first to review “Planet IPOE-E302”
One Power Source for Multi Powered Devices
Today's IP surveillance technology makes the remote extension of IP cameras easy and the management of monitoring more effective. With the IPOE-E302, users do not have to change their existing network systems. The extender is an ideal solution for the expansion and extension of the current network infrastructures without having to add any cables and other related components and parts.
The IPOE-E302 industrial 1-port 802.3bt PoE to 2-port 802.3at Gigabit PoE Extender, powered by a PSE over standard RJ45 cable, requires very little installation time and does not require any additional setup or programming. The PoE injector port of the PSE supplies IEEE 802.3bt PoE power to the IPOE-E302 and then the IPOE-E302 transmits the power to 2 powered devices that are IEEE 802.3af/at PoE standard compliant, meaning any additional power adapter for IP cameras and wireless access points is not necessary.
| Hardware Specifications | |
|---|---|
| Network Connector | PoE in Port 1 x 10/100/1000BASE-T Ethernet with 802.3bt PoE++ “Data + DC” in, auto MDI/MDI-X, auto-negotiation RJ45 connector PoE out Port 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at PoE “Data + DC” out, auto MDI/MDI-X, auto-negotiation RJ45 connector |
| Switch Architecture | Store-and-Forward switch architecture |
| MAC Address Table | 2K MAC address table with auto learning function |
| Data Buffer | 1Mbit |
| Switch Fabric | 6Gbps |
| Switch Throughput | 4.46Mpps @ 64Bytes |
| Flow Control | IEEE 802.3x pause frame for full duplex Back pressure for half duplex |
| Vilaitiya Frame | 9Kbytes |
| ESD Protection | Air 8KV DC Contact 6KV DC |
| Surge protection | 6KV |
| Enclosure | IP67-rated and IK10 aluminum metal case |
| Installation | Wall-mount ear |
| LED Display | Link/ACT LED x 3 |
| Dimensions (W x D x H) | 150 x 43.8 x 72.94 mm (W x D x H) 169.85 x 43.8 x 72.94 mm (W x D x H), with cable gland |
| Weight | 339g 372g (with three waterproof cable glands) |
| Power Consumption | 97 watts/331.6BTU (Full loading with PoE function) |
| Power over Ethernet | |
| PoE Standard | PoE in Port IEEE 802.3bt PoE++ Type 4 standard PD PoH (Power over HDBASE-T) IEEE 802.3at PoE+ end-span/mid-span PD Per PoE out Port IEEE 802.3at PoE+ mid-span PSE |
| PoE Power | PoE in Port 50~57V DC, max. 95 watts 44~50V DC, max. 30 watts Per PoE out Port 48~56V DC, max. 30 watts |
| Power Pin Assignment | PoE in Port 1/2(-), 3/6(+), 4/5(+), 7/8(-) or 1/2(+), 3/6(-), 4/5(+), 7/8(-) Per PoE out Port 4/5 (+), 7/8 (-) |
| PoE Power Budget | 60 watts (max.) @ 802.3bt PoE++ input 65 watts (max.) @ PoH input 30 watts (max.) @ IEEE 802.3at PoE+ input No support @IEEE 802.3af PoE input |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A CE |
| Stability Testing | IEC 60068-2-32 (Free fall) IEC 60068-2-27 (Shock) IEC 60068-2-6 (Vibration) |
| Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt Power over Ethernet Plus Plus |
| Environment | |
| Operating | Temperature: -40 ~ 75 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
| Storage | Temperature: -40 ~ 85 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Related products
Ethernet
– Ethernet over VDSL2 Bridge
– 4-port
– Profile 17a / 30a
– CO/CPE Mode
- Plug & Play
€ 79,95 (excl. VAT)
€ 96,74 (Incl. VAT)
Power over Ethernet
– High Power PoE extender
– from 100 meters to 200 meters range
– Gigabit
– Multiple units in series for greater range
€ 50,95 (excl. VAT)
€ 61,65 (Incl. VAT)
Power over Ethernet
– Ultra PoE Injector
– 60 Watt
– Internal Power Adapter
– Gigabit
– 1 gate in/out
€ 59,95 (excl. VAT)
€ 72,54 (Incl. VAT)
PoE switch
– 8 port 10/100/1000Base-T
– 4-port IEEE802.3af/at PoE+ injector
– Fanless design
– 30 watts per port
– UTP extension – 250 meters
€ 79,00 (excl. VAT)
€ 95,59 (Incl. VAT)
Power over Ethernet
– Ultra Power over Ethernet Splitter
- 60 watts
– Gigabit
– output 12V/19V/24V selectable
€ 69,75 (excl. VAT)
€ 84,40 (Incl. VAT)
PoE switch
– Suspension for 10″ Rack
– Suspension for 19″ Rack
– Suitable for many 10/19″ units
€ 8,55 (excl. VAT)
€ 10,35 (Incl. VAT)
PoE switch
– Suspension for 19″ Rack
– Suitable for many 10″ units
€ 10,79 (excl. VAT)
€ 13,06 (Incl. VAT)
Switches
– 5-port Switch
– 10/100Mbps
– Desktop
– Plastic shape
€ 13,80 (excl. VAT)
€ 16,70 (Incl. VAT)
Reviews
There are no reviews yet.