Planet ICS-105A
€ 74,95 (excl. btw)
€ 90,69 (incl. btw)
– RS-232 / 422 / 485 to 100Base-FX media converter
– SFP Gbic connector
– Build in Web interface
– Async serial Data rate up to 921600bps
2 op voorraad (kan nabesteld worden)
Cost-effective Solution for RS-232 / RS-422 / RS-485 to Ethernet Application
PLANET ICS-105A series Media Converter / Device Server can convert Serial RS-232 / RS-422 / RS-485 communication interface over Fast Ethernet networking. The unit uses a SFP connector, and single-mode/multi-mode media for customers needs. Ethernet signal allows the two types of segments to connect easily, efficiently and inexpensively. The ICS-105A converter can be used as a stand-alone unit or as a slide-in module to PLANET Media Converter Chassis (MC-700 and MC-1500). It greatly saves time and expense for users and SIs without the need of replacing the existing serial equipment and software system.
Extending Distance
The ICS-105A extends the distance of deploying serial equipment and hosts. The selectable fiber-optic wires on the basis of distance are provided. Therefore, this product will perfectly satisfy the diverse demands while providing reliable and efficient network solutions based on the distance and budgets of installation.
Remote Manageable
The ICS-105A enables the serial equipment to be connected via IP-based transmission. It also makes them able to connect to a TCP / IP networking immediately. The ICS-105A Web Smart media converter provides management through Web Interface. It supports application mode and serial operation mode, connecting alarm, IP address, etc. It helps the network administrators to reduce the amount of valuable time spending on detecting and locating network problems; otherwise, it requires visual inspection of cabling and equipment. For large networking environment, multiple connection options are available with the ICS-105A as well.
Wees de eerste om “Planet ICS-105A” te beoordelen
Access Control System – Traditional Installation
Most of the enterprises and governments use access control plate and Mifare or RFID to authorize entrance identity. With traditional deployment, access control machines use the RS-232 or RS-485 serial interface and cables connecting to login server. With connection with the ICS-10x Serial over Fast Ethernet Converter, the access control machine is able to be extended over longer distances via fiber optical interface. The distance can be up to 20km in a local range. The ICS-10x can also be linked to an XDSL router to get the Internet access capability; then the access control can be set and monitored over the Internet.
Process Control
The PLC (Programmable Logical Control) is required to monitor, configure and manage the Robot conveyer including other machines in the manufacturing process. The ICS-10x can be set to TCP server mode and connect with the PLC. Therefore, the administrator can remotely configure and set command settings through Fast Ethernet intranet to control the PLC, the administrators and workstations. There is no need for the administrators to be always by the side of the I/O machine.
RTU Data Collect – UDP Mode
The RTU (Remote Terminal Unit) may be applied to collect and monitor the data of waves, signal and power utilization. Connecting the RTU with the ICS-10x in UDP mode, the data can be sent over Fast Ethernet to local server or over Internet to remote server automatically.
Surveillance Motion Control – Pair Connection Mode
Using pair connection along with the fiber optic patch cord, the ICS-10x extends the remote central surveillance monitoring with the control keyboard/joystick via RS-232 / RS-422 / RS-485 interfaces.
| Serial Port | |
|---|---|
| Interface | RS-232 / RS-422 / RS-485 |
| Connector | 3-in-1 DB9 |
| Baud rate (Data Rate) | 300bps to 921600bps |
| Character Bits | 5,6,7,8 |
| Stop Bit | 1, 1.5/2 |
| Parity Type | Odd, Even, None, Space, Mark |
| Flow Control | H/W, None |
| Signals | RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422: Tx+, Tx-, Rx+, Rx- RS-485(2-wire): Data+, Data- RS-485(4-wire): Tx+, Tx-, Rx+, Rx- |
| Fast Ethernet Port | |
| Standard | 100Base-FX |
| Connector | ST Interface : ICS-101 SC Interface : ICS-102 / ICS-102S15 LC Interface : ICS-105A |
| Mode | ICS-101: Multi-Mode ICS-102: Multi-Mode ICS-102S15: Single Mode ICS-105A : Vary on SFP Module |
| Distance | ICS-101: 2km ICS-102: 2km ICS-102S15: 15km ICS-105A : Vary on SFP Module |
| Optical Wavelength | ICS-101: 1300nm ICS-102: 1300nm ICS-102S15: 1310nm ICS-105A : Vary on SFP Module |
| Cable | ICS-102: 50/125μm or 62.5/125μm multi-mode fiber cable ICS-102S15: 9/125μm single-mode cable ICS-105A : Vary on SFP Module |
| Protection | Built-in 1.5KV magnetic isolation |
| Hardware | |
| LED Indicators | System: Power Fiber Port: Link / Active Serial Port: Serial port mode, RS-232, RS-422 or RS-485 |
| Management | Web Management PLANET Smart Discovery Utility |
| Virtual COM Utility Platform Supports | Windows Base Only: Windows XP Windows Server 2003 Windows 7 Windows Server 2008 Windows 8 (Must install latest version of WinPcap) Windows Server 2012 (Must install latest version of WinPcap) Windows 10 |
| Operation Mode | TCP Server TCP Client UDP Client Virtual COM Telnet Sever Pair Connection-Local(Master) Pair Connection-Pemote(Slave) |
| Dimensions (W x D x H) | 97 x 70 x 26 mm |
| Weight | 200g |
| Power Supply | External Power Adaptor 5V DC / 2A max. |
| Power Consumption | 5.5 watts (max) |
| Mechanical | Metal |
| Environment | Operating Temperature: 0~50 degrees C Storage Temperature: -10~70 degrees C Operating Humidity: 10%~90% RH Storage Humidity: 5%~90% RH |
| Emissions | FCC Class A, CE Certification |
| Standards | • IEEE 802.3 10Base-T, • IEEE 802.3u 100Base-FX • EIA / TIA RS-232 / 422 / 485 |
| Regulatory Approval | RoHS |
| Compatible Media Converter Chassis | MC-700 / 1500 / 1500R |
| Note | Reset Button on the rear panel for reset to factory default |
Gerelateerde producten
DIN-Rail Gigabit Media Converter
– Industrial Media Converter
– 10/100/1000T to 2-port 100/1000X SFP
– Slim IP30 metal case protection
– DIN rail and Wall mount design
– Redundant Power Supply
– Temp. range -40 ~ +75 degrees
€ 159,00 (excl. btw)
€ 192,39 (incl. btw)
Media Conversion
– ITU-T G.993.5 G.vectoring en G.INP
– DMT-based coding technologie
– Ingeb. POST splitter – delen voice+data
– CO/CPE mode select. via DIP switch
– Select. target band plan+SNR margin
– Tot wel 10/150Mbps bandbreedte
€ 102,00 (excl. btw)
€ 123,42 (incl. btw)
DIN-Rail Gigabit Media Converter
– 1000SX/LX to 10/100/1000T PoE
– Industrial Media Converter
– LC Fiber Interface (vaying on SFP Module)
– IP30 DIN rail and Wall-mount design
– -40 ~ +75 degrees C
€ 106,00 (excl. btw)
€ 128,26 (incl. btw)
Media Conversion
– ITU-T G.993.5 G.Vector en G.INP
– DMT-based coding technologie
– Ingebouwde POST splitter om voice + data te delen
– RJ11 conn voor VDSL poort + VDSL conn
– Telefoon connector voor telefoon conn
€ 128,95 (excl. btw)
€ 156,03 (incl. btw)
Media Conversion
• Ethernet over Coax Converter
• ITU-T G.993.5 G. Vectoring en G.INP
• Up/Down bandbreedte tot 200/100Mbps
• Één BNC conn. voor VDSL connectie
• Co/CPE mode via DIP Switch
€ 94,95 (excl. btw)
€ 114,89 (incl. btw)
Media Conversion
– Gigabit Media Converter
– 10/100/1000Base-T to 1000Base-LX
– SC, SM – 10 km
– Wall-mountable
€ 66,95 (excl. btw)
€ 81,01 (incl. btw)
Media Conversion
– 7-slot Chassis
– 10″ high Quality Rack-mount installation
– 100-240V AC Power Supply
– One fan for hardware cooling
€ 139,00 (excl. btw)
€ 168,19 (incl. btw)
Ethernet
– 1-Channel
– 4-in-1 Video over Gigabit fiber kit
– Long distance transmission 20km
– Data type: RS485
€ 189,00 (excl. btw)
€ 228,69 (incl. btw)
Beoordelingen
Er zijn nog geen beoordelingen.